<![CDATA[<body bgcolor="#FCE9F2">
<p><font color="#FCE9F2" size="-4">
Submittal Sheet Pink AF-FDM Fiber Glass Flexible Insulation Pink AF-FDM Fiber Glass Flexible Insulation Description Owens Corning Pink AF-FDM fiber glass flexible insulation is a lightweight, flexible, resilient thermal and acoustical insulation made of inorganic glass fibers bonded with a thermosetting resin. Uses Owens Corning Pink AF-FDM fiber glass flexible insulation is the insulation material designed specifically for use by manufacturers of flexible air ducts. Its resiliency allows it to be shaped around small diameter cores smoothly and without buckling. Features and Related Benefits Thermally efficient You are assured desired thermal performance with Pink Owens Corning AF-FDM flexible insulation. Excellent sound absorption Pink Owens Corning AF-FDM flexible insulation reduces equipment and air movement noise. Easy fabrication Pink Owens Corning AF-FDM insulation stands up to handling and fabrication without pulling apart, making processing easier and faster. UL labeled Every roll of Pink Owens Corning AF-FDM flexible insulation carries the Underwriters Laboratories recognized component label and has a flame spread rating of 25 and a smoke developed rating of 50. Compression packaging Easy to handle and saves valuable storage space. More material can be shipped and stored in less space. The recognition value of Pink** fiber glass insulation enjoys a 12 to 1 consumer preference as shown by a recent pink insulation survey. This strong recognition factor helps presell flexible duct customers, enhancing sales and profit opportunities at no additional cost. * The surface burning characteristics of these products have been determined in accordance with UL 723 and CAN/ULC-S102-M. These standards should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. ** The color PINK is a trademark of Owens Corning. OWENS CORNING WORLD HEADQUARTERS ONE OWENS CORNING PARKWAY TOLEDO, OHIO, USA 43659 www.owenscorning.com The GREENGUARD Indoor Air Quality Certified mark is a certification mark used under license through the GREENGUARD Environmental Institute. Pub. No. 15-MS-10023-F Printed in U.S.A., April 2004 Copyright © 2004 Owens Corning Performance and Physical Properties Property Test Method Specification Tolerance Fire hazard classification* UL 723 FHC 25/50 Thermal conductivity (k) ASTM C 177 0.29 +10% at 75ƒF mean temperature (Btuin/hrft2ƒF) Noise reduction ASTM C 423 0.65 ±0.05 coefficient Mounting A * The surface burning characteristics of this product have been determined in accordance with ASTM E-84. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest five rating. Application Recommendations Owens Corning Pink AF-FDM fiber glass insulation is intended to be wrapped around an inner core and held in place by an external jacketing material. Best thermal performance at all air velocities is provided by an impervious inner air barrier film. This film also acts to keep the insulation out of the air stream, reducing the possibility of further air friction loss. Specification Compliance Owens Corning Pink AF-FDM fiber glass insulation complies with the property requirements of ASTM C 553, Type I. Precaution Owens Corning recommends that Pink AF-FDM insulation be held in compressed roll form for no more than six (6) months from production date. Pink AF-FDM Fiber Glass Flexible Insulation Dimensions Out of Package Min. Installed Use Thickness (inches) R 4.2 1.25" +3/8 - 0 11/8" R 6 2" + 3/8 - 0 15/8" R 8 2.25" + 3/8 - 0 21/8" Standard widths Available for each duct size by R value Length (feet) R 4.2 150' + 12" - 0 R 6 125' + 12" - 0 R 8 75" + 12" - 0 Packaging: Compression packaged, open end rolls While Owens Corning Pink AF-FDM fiber glass insulation carries the UL recognized component label for air ducts, this does not guarantee that the finished flexible duct composite product will meet UL 181 air duct material requirements for such a product. Pink AF-FDM insulation is a component of a product, and UL 181 measures the performance of all components in the finished product. INNOVATIONS FOR LIVING
</font></p>
</body>]]>